High Quality Coalescer and Separator Filter Elements, Compressed Air Pre-filter, Particulate Matter Air Filter Suppliers in China

Home > Products > Ultra Filtration System > Ultra Fine Particle Air Filter

Ultra Fine Particle Air Filter

Ultra Fine Particle Air Filter

    Packaging: Carton
    Transportation: Ocean,Land,Air
    Supply Ability: 500PCS Per Days
    Port: Yantian,Guangzhou,Shanghai

Basic Info

Model No.: HG025

Product Description

Features & Benefits

1. The new dual-level design makes it easier for users to observe the condensate discharge inside the filter and judge whether the drain is blocked;

2. Parallel design, reducing the time of installation and paralleling;

3. No screw design, easy to replace the filter element;

4. The material of the sodium borosilicate glass fiber filter element ensures high-efficiency filtering effect and meets the ISO8573.1-2010 standard;

5. The shell has a service life of 15 years, and the filter element has 6000-8000 hours of filtration level except ACS;

6. Wall buckle design, easy to install on the wall.

Guaranteed Quality
All YUKA series Compressed Air Filters have TWO GUARANTEES.

The first guarantee is a filter element PF/AO/AA/AX grade with 6000-8000 hours serve life. ACS/AR/AAR grade with 2000-3000 hours.
This ensures that the solid particle, oil aerosol and vapor content selected conforms to the ISO 8573.1 international standard.

The second guarantees the compressed air Filter Housing for fifteen years under recommended operating conditions.

International test and measurement standard ISO12500
>ISO 12500 has made clear a general test and definition method for the compressed air filter manufacturers. The main performance
parameters are the air inlet oil content and particles size distribution of the solid particles.
>ISO12500-1 specifies the test requirements for the filtration performance of oil aerosol in the coalescing filter.
>ISO12500-2 specifies the test requirements of adsorption filters for the removal performance of steam adsorption.
>ISO12500-3 specifies the requirements for removal of particulate matter from solid pullutants.

Product are test with the international advanced testing equipment based on standard ISO12500, Which is equivalent to the standard
ISO8573.1-2010 quality standard, and provide filter performance test report.

Filtration Grade PF AO AA AX ACS AR AAR
Particle removal (ISO12500-3) 5μm 1μm 0.01μm 0.01μm - 1μm 0.01μm
Outlet oil aerosol concentration (ISO12500-1) 5mg/m³ 0.6mg/m³ <0.01mg/m³ <0.001mg/m³ <0.004mg/m³ - -
Filtration performance of Particle (ISO12500-3) - 99.999+% 99.999+% 99.999+% 99.999+% 99.999+% 99.999+%
Filtration performance of oil (ISO12500-1) 50% 80+% 99.9+% 99.99+% - - -
Element spanlife 6000 hours 6000 hours 6000 hours 6000 hours 2000-3000 hours 4000-6000 hours 4000-6000 hours
Filtration Type Coalescence Coalescence Coalescence Coalescence Adsorption Coalescence Coalescence
Airflow direction From inside to outside From outside to inside

Technical Specification
The flow rate below is the treatment capacity of compressed air under rated working pressure 7bar g(100psi g).
For the application in other working pressure, please refer to the correction factors.
Model Pipe size Flow rates Dimension (mm)
L/S /min scfm W(Width) D(Depth) H(Height) A B C(clearance for housing)
HG017 RC1/2" 16.7 1.0 35.3 92 83 265 - - -
HG025 RC3/4" 25 1.5 53 92 83 265 - - -
HG030 RC1/2" 30 1.8 63.6 92 83 285 17.5 193 158
HG035 RC3/4" 33.3 2 70.6 92 83 285 17.5 193 158
HG058 R3/4" 46.7 2.8 98.9 132 120 393.5 24.4 257.6 195
HG068 RC1" 60 3.6 127.1 132 93.3 393.5 24.4 257.6 195
HG080 RC1" 80 4.8 169.5 132 119.6 502 24.4 356.2 300
HG145 RC1" 120 7.2 254.2 132 19.6 502 24.4 356.2 300
Technical requirements Maximum operating pressure: 10 barg Maximum operating temperature: 80°C Minimum operating temperature:1.5°C

Pressure Barg 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Psig 15 29 44 59 73 87 100 116 131 145 160 174 189 203 219 232
Correction factor 0.38 0.53 0.65 0.76 0.85 0.93 1.00 1.07 1.13 1.19 1.23 1.31 1.36 1.41 1.46 1.51

How to choose right filter for Your Air Compressor System?

When you’re working with air compressors, air purification and filtration is an critical part of maintenance. Compressed air filters play an important role in your industrial air compressor system. Choosing the right filter not only increases the efficiency of your unit, but it can also reduce energy costs and protect your employees from harmful chemicals and particulates.

However, does all air filter work for your compressed air system? Well it is depending on your working conditions, the project you’re completing and how often you use your equipment, you’ll need to make an precise choice. This guide will detail how air compressor filters work, why they’re important, what type of air compressor filter to buy and when you should replace it.

①Assess the requirements of your application. Different industry require different solution.
②What type of filtration is needed? Coalecent filter material removes solid and liquied contaminants from gas streams. Particulate filter media removes solid from gas streams. Absorber media removes hydrocarbon vapors from gas streams.
③Any specific micron of filtration performance you required?
④What are the working conditions of your application? Mainly criteria of consider : Flow, working pressure, temperature,pressure loss,material of structure (stainless steel, aluminum alloy, mild steel, carbon steel)
⑤Filter flow rate from how much SCFM? Pressure drop should be less than **bar? For saving the cost and protect environment.

Hongrijia Depurate Facility Science & Technology Co.,Ltd


Hongrijia Purification Equipment Technology Co., Ltd. was founded in 1998 and is located in Shenzhen, Guangdong Province. Own brand YUKA and has branches in Huizhou, Tianjin and New Delhi, India, with a total production area of 20,000 square meters.

As a well-known manufacturer of compressed air drying, filtering and separation equipment in China, YUKA is focusing on R&D, production and sales of high-quality compressed air treatment and purification equipment, breaking the situation that China's compressed air filtration and separation technology is occupied by foreign markets. Provide high-quality products and services for industries that need compressed air as a source of power.

Our product types include compressed air refrigeration air dryer (dew point: 2~10), adsorption air dryer (dew point: -20~ -70), high-efficiency compressed air filter, cyclone gas-water separator, oil and gas separator , compressor air filter, oil filter, alternative filter element, floating ball automatic drain and accessories.

The star products are HLX series drying and filtering in one refrigeration dryer, GHF series 30bar high efficiency compressed air filter, G-BHL series 60bar stainless steel compressed air filter, HF series and YD series compressed air filters, etc. . The products have obtained a number of national invention patents, utility model patents and appearance design patents. Widely used in military, medical, semiconductor, optoelectronics, nuclear power plants, aerospace, food, beverages, spray coating, laser cutting, chemicals, metallurgy, transportation, electronics, machinery manufacturing, glass, cement, automation, medical treatment, semiconductors, nuclear power plants and aviation And other fields.

YUKA always adheres to quality as the core, and continues to provide customers with high-quality pre-sales, sales and after-sales services, and provides clean, dry, high-quality compressed air for industrial applications, reduces energy consumption, saves production costs, and improves product qualification rate.

Company Info

  • Company Name: Hongrijia Depurate Facility Science & Technology Co.,Ltd
  • Representative: Liu Bai Fan
  • Product/Service: Compressed Air Dryer , Compressed Air Filter , Air Water Separator , Condensate Auto Drain , Air Filter Element , Differential Pressure Gauge
  • Capital (Million US $): US$ 5 Millions
  • Year Established: 1998
  • Total Annual Sales Volume (Million US $): US$50 Million - US$100 Million
  • Export Percentage: 21% - 30%
  • Total Annual Purchase Volume (Million US $): US$10 Million - US$50 Million
  • No. of Production Lines: 10
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 10,000-30,000 square meters
  • Factory Location: 6th Floor, Block H, No. 8, Qinglan 1st Road, Pingshan District, Shenzhen
  • Contact Person: Ms. YUKA
  • Tel: +86-0755-28686438
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters